Various unexpected problems will occur during the use of flour processing equipment. In fact, these problems have their own reasons. When we use machinery, we need to continue to learn and research equipment to better avoid the occurrence of problems, and more It's good to query the root of the problem. As a professional grain processing equipment manufacturer, Jiangsu Suhao Honggang will work with you to understand the impact if the sieve body of flour processing equipment is misaligned:

We all know that wheat milling machine is an equipment that processes raw grains. It goes through many links during the production process, and one of them is to screen the raw grain particles so that the impurities in the raw grains are removed and the flour Processing equipment can work better. However, during the operation of the wheat milling machine, material deviation may occur, usually during the flour cleaning process. If it is not solved, it will cause the material to continue to deviate, then the material classification will be destroyed and the powder cleaning effect will be reduced. Therefore, the staff are required to pay attention to it. When an abnormal situation is discovered, they must stop the operation in time, and then find out the cause and solve it.

The reason for the deviation of materials in the wheat milling machine may be that the screen body of the equipment itself is uneven, which requires personnel to re-pad the machine frame and adjust it. It is also possible that the axial stiffness of the rubber spring is inconsistent and the amount of compression is different. At this time, the personnel need to replace the rubber spring selected with added force to make the compression amount the same and level it. In addition, it was found that the motion trajectory of the screen body was incorrect. The personnel noticed that the excitation forces of the two motors were different, and adjusted the weight of one of them to make them the same. The resultant force of the excitation force of the two motors does not pass through the longitudinal symmetry plane of the screen body. Loosen the U-shaped fastening bolts and adjust the position of the motor to make it symmetrical with the other one. The rubber spring has deformed and failed, replace it with a new one.