During the oil extraction process, sediments will be left behind and clogging will occur. How to deal with them has become a problem that many people are concerned about. This article will introduce some practical methods to help you effectively deal with sediment and blockage in the oil press to ensure the smooth progress of the oil press process.

 How to deal with sediment:

Regular cleaning: Establish a regular cleaning plan, check all parts of the oil press, and remove accumulated sediment. This prevents sedimentation from reaching a level that affects the operation of the oil press.

Use a filter: Installing an effective filter can intercept larger sediments during the oil extraction process and prevent them from entering the oil press system. Replace the filter regularly to keep it working effectively.

Pre-treatment of oil: Before oil extraction, proper pre-treatment of oil, including cleaning, sorting, etc., can help reduce the formation of sediments.

Adjust process parameters: According to the characteristics of the oil and the specifications of the oil press, adjust the process parameters to make the oil pressing process more stable and reduce the formation of sediments.

 How to deal with blockage:

Shutdown inspection: Once the oil press is found to be clogged, stop it immediately for inspection. Forcible operation may cause more serious failure.

Clean the squeeze area: Check the squeeze area of the oil press and clean any areas that may cause blockage. Use appropriate tools such as cleaning brushes, air guns, etc.

Check the screw: The screw of the screw oil press is prone to clogging. Check the screw rod for foreign matter and clean out any impurities.

Check the motor and transmission system: Ensure that the motor and transmission system are operating normally to avoid overloading and blockage of the oil press due to motor problems.

Adjust the oil extraction speed: Properly adjusting the oil extraction speed of the oil press can sometimes reduce clogging.

Heat Treatment: For some oils, clogging may be related to an increase in the viscosity of the oil. Heating oil can reduce its viscosity and reduce clogging.

Spare Parts: Check to see if spare parts are available so that damaged parts can be replaced if needed.

Through regular inspection, cleaning and maintenance, as well as the flexible use of different treatment methods, possible sedimentation and blockage problems in the oil press can be effectively dealt with.